Filter
Top Products
14
Disconnecting
To end the call and hang up, press OFF
on the Base Unit.
ANSWER A CALL
By the Handset
If your phone rings, the LINE 1 (or LINE
2) on the Handset will illuminate, and
the corresponding LINE key on the
Base will be flashing.
1. When the Handset is in the Base.
You can answer the call by just pick-
ing up the Handset.
2. If the Handset rings when it is away
from the Base, press the appropri-
ate LINE key, or any numeric key to
answer the call.
By the Base Unit
The Base will ring and the appropri-
ate LINE key will Flash. You can an-
swer by pressing the corresponding
LINE key.
TO PUT A CALL ON HOLD
While using the Speakerphone or the
Handset, you can put a call on hold
by pressing HOLD. The LINE key on
the Base or Handset will blink and
the Base or Handset will emit an alert
beep every 20 seconds to indicate a
call is on hold.
To return to the call, press the corre-
sponding LINE key on the Base Unit
or Handset.
If a call is on HOLD using the VT 9241
and the user picks up another phone
on the same line, the VT 9241 will au-
tomatically take itself off HOLD and turn
OFF.
THE MUTE FEATURE
1. When you press the MUTE key while
using the Speakerphone, you can
hear your party’s voice, but your
party can’t hear you.
2. While the call is muted, the MUTE
indicator will be lit.
3. To go back to the two-way conver-
sation, press MUTE again.
TIPS ON USING THE VT 9241 SPEAK-
ERPHONE:
1. Adjust the Speakerphone volume
to a comfortable listening level by
OPERATING INSTRUCTIONS
900
MH
Z
CORDLESS
VT9241
CONF
REDIAL
MUTE
HOLD
MEMORY
INT.COM/PAGE
POWER
CHARGE
SPARE BATT
900
MH
Z
CORDLESS
VT9241
CONF
REDIAL
MUTE
HOLD
MEMORY
INT.COM/PAGE
POWER
CHARGE
SPARE BATT
MIC
7PQRS 8TUV 9 WXYZ
TONE
0
OPER
LINE 1 LINE 2
OFF
FLASH FLASH