VTech VT 9241 Cordless Telephone User Manual


 
15
pressing the VOL UP or DOWN
keys.
2. If there is background noise in the
area where you are using the
Speakerphone, (people talking, a
radio or television playing, for ex-
ample), you may experience some
degree of “chopping” or “dropout”
as your party speaks. To remedy
this, do the following:
* Try to lower the source of the back-
ground noise in your environment;
otherwise;
* When it’s your party’s turn to talk,
press the MUTE key. The MUTE LED
will glow. When it is your turn to
speak, press MUTE again to reacti-
vate the Base Unit microphone.
MAKING OR ANSWERING A CALL
WHILE YOU’RE ALREADY ON A
CALL
NOTE: For 2-Line operation, you
will need 2-Line phone service
from your local service provider;
each line with its own, unique
phone number .The VT 9241 will
work as a single line phone as
well.
From the Handset
If you are on a call, and you wish to
either make or answer a call on the
unused line, you can:
Press OFF to end your original call,
then press the other LINE key;
OR
Press the other LINE key first. Your origi-
nal call will automatically be placed on
HOLD. You now have the following op-
tions:
1. Press OFF to end the call you’re cur-
rently on, then press the other LINE
key to return to the original call.
OR
2. CONFERENCE Lines 1 and 2 to-
gether. For more details, see CON-
FERENCE CALLING.
From the Base Unit
If you are on a call, and want to answer
a call ringing on the unused line, you
can:
Press OFF to end the original call, then
press the appropriate LINE key to an-
swer the new call;
OR
OPERATING INSTRUCTIONS
900
MHz
CORDLESS
LINE 1
OFF
LINE 2
2
ABC
13
DEF
4
GHI
5
JKL
6
MNO
FLASH FLASH
INT.COM/PAGE
VOL
2ABC13DEF
4GHI 5JKL 6MNO
7
PQRS
8 TUV 9 WXYZ
TONE
0
OPER
LINE 1 LINE 2
OFF
FLASH FLASH