Filter
Top Products
44
HEADSET OPERATION
Your Vtech cordless phone is equipped
with a 2.5mm Headset Jack for usse
with an sptional accessory Headset for
hands-free operation.
If you choose to use the Headset
option, you must obtain an optional
accessory Headset, which is
compatible with the Vtech cordless
phone.
To purchase a Headset, call Vtech at
1-800-595-9511.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Vtech cordless phone Handset.
Connect the plug on the Headset cord
to the jack on the cordless Handset.
The plug should fit securely. Do not
force the connection
Operation
NOTE: Whenever a compatible
Headset is connected to the cordless
Handset, the microphone on the
Handset will be muted. This is done to
limit the effect of background noise.
The following operational
characteristics apply to Vtech
Headsets. The same may also apply
to other, non-Vtech supplied Headsets,
but Vtech assumes no responsibility
for their performance.
The Vtech brand compatible Headset
has a reversible, monaural design.
You can wear your Headset on either
ear, leving one ear free for room
conversation.
The headband can be adjusted to fit
the contour of you head. Usong both
hands, side the headband up or down
so that it rests comfortably on your
head, with the speaker cushion
centered against your ear.
For maximum sound quality, the flexible
microphone should be positioned at
the corner of your mouth, about one
inch from your face.
Belt Clip
The Vtech cordless phone is also
equipped with a detachable belt clip.
Align the pins on the inside edge of the
clip with the notches on te sides of the
Vtech cordless phone Handset. The
belt clip should snap securely into
place. Do not force the connection.