VTech VT 1962 Cordless Telephone User Manual


 
34
PAGE
DELETE
TIME/SET SELECT MENU
SPARE
BATTERY
CHARGING
IN USE
MEMO
ANSWER
ON/OFF
Press
Press
Press
Setting the Base
Ringer
SELECT
MENU
TIME/SET
PLAY/STOP
VOLUME
SKIP/QUICK
REPEAT/SLOW
MAIL BOX
1
MAIL BOX
2
MAIL BOX
3
Note: You can store one OGM for
Announce Only mode, and a separate
OGM for Normal (accept messages)
mode. The appropriate OGM will be
played based on how you set
Announce Only.
Set Base Ringer On/Off
The Base ringer can be turned ON or
OFF.
ANSWERING SYSTEM SETUP
Set Number of Rings
The Answering System has 4 ring type
settings:
2 rings The incoming call is answered
after 2 rings.
4 rings The incoming call is answered
after 4 rings.
6 rings The incomng call is answered
after 6 rings.
Toll Saver The incoming call is
answered after 2 rings only
if there are new messages/
memos present. Otherwise,
the call is answered after 4
rings. This may help you
avoid long distance charges
when retrieving messages
remotely.
1. Press MENU until you hear "Set
Base Ringer"
2. Press SELECT to toggle between
ON or OFF.
3. Press TIME/SET to confirm your
selection. Voice prompt of "Base
Ringer is ON" or "Base Ringer is
OFF" will be announced to confirm
your setting.
1. Press MENU until you hear "Set
number of rings."
2. Press SELECT until you hear the
desired setting "2", "4", "6", or "Toll
Saver".
3. Press TIME/SET to confirm your
choice. The selected setting is
then announced.
PAGE
DELETE
TIME/SET SELECT MENU
SPARE
BATTERY
CHARGING
IN USE
MEMO
ANSWER
ON/OFF
Press
Press
Press
Setting Number of
Ringer
SELECT
MENU
TIME/SET
PLAY/STOP
VOLUME
SKIP/QUICK
REPEAT/SLOW
MAIL BOX1
MAIL BOX2
MAIL BOX3