Filter
Top Products
32
VOLUME
PAGE
SKIP//QUICK
REPEAT/SLOW
DELETE
TIME/SET SELECT MENU
PLAY/STOP
MAIL BOX
1
MAIL BOX
2
MAIL BOX
3
SPARE
BATTERY
CHARGING
IN USE
MEMO
ANSWER
ON/OFF
RecordingYour OGM
Press
Press
Press
MENU
PLAY/STOP
MAIL BOX
1
MAIL BOX
2
MAIL BOX
3
MEMO
PAGE
DELETE
TIME/SET SELECT MENU
SPARE
BATTERY
CHARGING
IN USE
MEMO
ANSWER
ON/OFF
Press
Press
Press
Press
Set Security Code
SELECT
MENU
TIME/SET
TIME/SET
PLAY/STOP
VOLUME
SKIP/QUICK
REPEAT/SLOW
MAIL BOX1
MAIL BOX2
MAIL BOX3
Recording / Playing / Deleting
the Outgoing Messages (OGM)
Set Security Code
The security code programmed into
the Answering System is used to gain
access to functions from remote
locations.
The security code default setting is 19.
ANSWERING SYSTEM SETUP
1. Press MENU key until the desired
item (Set Outgoing Message) is
announced.
2. Press MEMO . "Now recording",
is announced, followed by a beep.
Speak towards the front of the
Answering System (max. length:
90 seconds).
3. Press any MAILBOX key to stop
the recording.
4. Then OGM replays the message
automatically, followed by a beep.
5. To review a recorded announce-
ment, press MENU key until "Set
Outgoing Message" is announced.
Press any MAILBOX key. The
current greeting is played.
6. To delete a recorded announce-
ment, press DELETE during
OGM playback. You then hear
"Outgoing Message has been
erased".
Note: If your recording time is less than
2 seconds, your OGM will not be
recorded, and the default greeting will
be used.
1. Press MENU unit you hear "Set
security code."
2. Press TIME/SET to hear the
current security code.
3. Press SELECT briefly to increase
the security code by 1. Or, hold
SELECT continuously to increase
the code by multiples of 10.
4. Press TIME/SET to confirm your
choice and you will hear the
announcement of the security
code.
Day and Time
During initial setup, or after a power
failure, the day and time default is set
to Monday, 12:00am. The display will
flash "CL" to indicate day and time
need to be set.