Filter
Top Products
19
Storing
The Phone should be
OFF
Enter Phone number
Press
You will see
Enter Memory location
(01-20)
QUICK REFERENCE GUIDE
To Mute A Call
• Press MUTE to disable the
Handset microphone.
• Press MUTE again to return to
normal two way conuersation.
To Page The Handset
• To page from the Base, press
PAGE
.
• To cancel the PAGE either press
PAGE again on the Base or press
OFF on the Handset.
Storing Memory (SPEED) DIAL
NUMBERS:
• The phone should be OFF.
• Enter the number you wish to store
on the LCD up to a maximum of 20
digits.
Set-Up
• Plug AC adapter into a standard
electrical outlet and Base Unit
• Set Dial Mode switch to PULSE or
TONE. The unit is factory set to
TONE.
• Let the Handset battery pack charge
for 16 hours before first use.
• Connect telephone line cord to
Base Unit and telephone jack.
Making Calls
• Press the PHONE key. When
the "PHONE ON" indicator is
displayed and you hear a dial tone,
dial the number.
OR
• Enter the number to be dialed on
the LCD and then press the
PHONE key.
Answering Calls
• To answer a call, press any key
other than OFF , MUTE , or the
Volume Keys. The Handset will
NOT auto-answer when lifted off
the Base cradle.
Hanging Up
• Press OFF or place the Handset
in the cradle to hang up a call.
To Place A Call On Hold
• Press HOLD on the Handset to
place an active call on hold. Press
HOLD again to return to the call.
• Press PROG . The LCD will
display "PROGRAM LOCATION "
• Enter a two digit memory location
(01 .. 20), the unit will store the
number, emit a happy tone to
confirm successful programming
and exit program mode.