Filter
Top Products
25
Storing Speed Dial
Numbers
Dial your Phone number
Press
Enter location
(01-20)
MEMORY DIALING
• Enter the memory location (01..20)
you wish to store the number in. As
soon as the second memory location
digit is entered, the unit will emit a
happy tone (a short series of beeps)
to confirm successful programming
and exit program mode.
Storing Memory (Speed) Dial
Numbers
To program a speed dial location, do
the following:
• With the phone OFF, enter the
telephone number you wish to
store. (20 Digits Maximum).
• Enter program mode by pressing
PROG . The display will show the
following:
If programming is unsuccessful the unit
will display:
Unsuccessful programming can result
from not correctly completing the
programming sequence. For example,
if after entering a number on the
LCD and entering program mode, the
OFF key were pressed instead of
entering a valid memory location, the
"PROGRAMMING INCOMPLETE"
message would appear. If this message
appears,
simply
repeat
the program-
ming sequence.
Dialing From Memory
• Press PHONE to get a line.
• Press MEM , you're prompted to
enter a speed dial location number:
• Enter a 2 digit location number
(01-20)
• The number stored in that location
will be displayed and immediately
dialed.
Or
• Beginning from the OFF mode,
press MEM followed by a 2 digit
location number (01-20). OR, press
xxx( ) or ( # ) to scroll through
the Speed Dial locations.
• Press MEM again to exit memory
dial mode and leave the number on
the display.
• Note that if digits were on the
display prior to entering memory
dial mode, the contents of the
speed dial memory will be appended
to those digits. For example, if 1503
was on the LCD and the contents
of the memory location is 6438981,
then the display would show the
following upon exiting memory dial
mode:
*