Filter
Top Products
14
PAG E
DELETE
TIME/SET SELECT MENU
PLAY/STOP
SPARE
BATTERY
CHARGING
IN USE
MEMO
ANSWER
ON/OFF
VOLUME
SKIP/QUICK
REPEAT/SLOW
MAIL BOX
1
MAIL BOX
2
MAIL BOX
3
GETTING STARTED
Connect Telephone Line Cord
Plug one end of the telephone cord into
a wall jack and the other end into the
back of the Base Unit.
Check for a dial tone. After the battery
pack is charged, rotate the Base Unit
antenna to an upright position. Pick up
the Handset and press PHONE .
"PHONE ON" will appear on the LCD,
and you will hear a dial tone. If not, see
'IN CASE OF DIFFICULTY' on page
46.
Fill in the telephone number card on
the Base Unit.
CAUTION:
1. Never install telephone wiring
during a lightning storm.
2. Never install telephone jacks in
wet locations unless the jack is
specifically designed for wet
locations.
3. Never touch uninsulated telephone
wires or terminals unless the
telephone line has been
disconnected at the network
interface.
4. Use caution when installing or
modifying telephone lines.