Filter
Top Products
24
Appendix
25
Appendix
Screen icons and indicator lights
Handset screen icons
Telephone line
Internet line
Intercom
Low battery (place handset in base or charger to recharge)
Dial pad locked (to unlock, select MENU then press *)
MUTE
Microphone is muted (select MUTE to resume conversation)
NEW
New calls (press CID to review call log)
Indicator lights
INTERNET LINE
On when Internet line is in use.
Flashes slowly when call is on hold.
Flashes quickly when line is ringing.
MUTE NEW
TELEPHONE LINE
On when telephone line is in use.
Flashes slowly when call is on hold.
Flashes quickly when line is ringing.
Adding new handsets
Your telephone can accommodate up to 4 cordless
handsets. You can add new handsets (sold separately)
at any time.
Before using a new handset, you must first install and
charge the batteries for 15 hours (see page 7).
After the batteries are fully charged, follow the pro-
cedure below to register the handset to the base.
1 Select MENU.
2 Highlight "Register," then select OK. The screen
will display, "Search Base".
3 Press and hold the LOCATE HANDSET button on
the base for at least 30 seconds.
4 The handset should beep to indicate the registra-
tion has completed. You will be prompted to
enter a name for the new handset (see page 17 for
help in entering names). We strongly recommend
that you give each handset a distinctive name, to
simplify paging and intercom use.
5 Select OK to save the new handset name. The
name you enter will be displayed on screen when
the handset is idle, and in intercom paging lists.
If the above procedure does not work, see page 29
for further suggestions.
NOT REGISTERED
MENU
Press MENU to begin
SEARCH BASE
1 > REGISTER
2 DEREGISTER
OK
HANDSET NAME
PAT_
OK
PAT
INTERCM MENU
Status symbols for Internet calls
Online/SkypeMe
? Away/Status Unknown
X Not Available/Do Not Disturb/Invisible/Offline