Filter
Top Products
www.vtechphones.com
6
Installation
• If you are not
going to use the
telephone for a
long period of
time, remove the
battery to prevent
possible leakage.
• If you have
any trouble
installing your
telephone, please
refer to the
Troubleshooting
section on pages
25-31 of this
manual.
holes on the wall mount bracket. Slide the base unit down on the mounting studs untilbase unit down on the mounting studs until down on the mounting studs until
it locks into place.
Charge the handset battery
Place the handset in the base unit.base unit.. CHARGING... will display on handset. Be sure to charge the
battery for at least 16 hours before using your telephone.
Language
• Press PROG, then press
once and LANGUAGE is displayed. Press SELECT.
• The current setting blinks. Press
or
to toggle between English and Spanish until the desired
language is blinking on the screen.
• Press SELECT to save.
Set handset date and time
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press
until DATE/TIME is displayed. Press SELECT.
• When the month is blinking, press
or
until the screen displays the correct month. Press
SELECT.
• When the day is blinking, pressWhen the day is blinking, press day is blinking, pressblinking, press
or
until the screen displays the correct day. Press SELECT.
• When the hour is blinking, pressWhen the hour is blinking, press hour is blinking, pressblinking, press
or
until the screen displays the correct hour. Press
SELECT.