Filter
Top Products
www.vtechphones.com
26
Problem Suggestion
I cannot dial out. • Make sure there is a dial tone before dialing. The handset may take a second or two to synchronize
with the base unit and produce a dial tone.
• Make sure the telephone is set to the correct dial mode (pulse or touch tone). It should match the dial
mode provided by the telephone company (pulse or touch tone). Refer to the Installation section
(page 7) of this user’s manual to set the dial mode.
• If other telephones in your home are having the same problem, the problem is in the wiring or local
service. Contact your local telephone company (charges may apply).
• Eliminate any background noise. Noise from a television, radio or other electrical appliances may
cause the telephone to not dial out properly. If you cannot eliminate the background noise, try muting
the handset before dialing, or dialing from another room in your home with less background noise.
My handset beeps
four times and isn’t
performing normally.
• Make sure the power cord is securely plugged into the base unit. Plug the power cord into a different
working outlet not controlled by a wall switch.
• Move the handset closer to the base unit. The handset might have moved out of range.base unit. The handset might have moved out of range.. The handset might have moved out of range.
• Reset the base unit. Unplug the power cord. Wait for 15 seconds and plug it back. Allow up to one
minute for the handset and base unit to synchronize.
• Other electronic products can cause interference with your cordless telephone. Try installing it away
from these types of electronic devices: wireless routers, radios, radio towers, pager towers, cellular
telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and
other cordless telephones.
Troubleshooting