Filter
Top Products
www.vtechphones.com
16
to be reassigned.
2. When the screen displays the desired entry, press SELECT. Then press
until SPEED
3. Press SELECT. The screen displays ENTER 1-9.
4. Press the keys (1 through 9) to reassign this entry into another memory location.
Directory
Your telephone can store 10 (including the nine speed dial entries) numbers with names (up to 15
characters for the name and 24 digits for the number) in each handset.
When the memory is full, the screen displays MEMORY FULL, and an error tone sounds. You will not
be able to store a new number until a stored number is deleted.
Store a number/name in the directory
1. Press PROG. The screen displays DIRECTORY.
2. Press SELECT. The screen displays ENTER NAME.
3. Using the chart on page 14, enter up to 15 characters for the name. Use
to backspace and make
to advance and add a space.
SELECT. The screen displays ENTER NUMBER.
5. Enter the telephone number. Use
to backspace and make corrections.
Press REDIAL/PAUSE to store a pause in the dialing sequence.
-OR-
Press REDIAL/PAUSE if you wish to display and store the last number dialed.
• Press REDIAL/
PAUSE to display
the last number
dialed from this
telephone to
store it in speed
dial memory.
Speed dial