Filter
Top Products
www.vtechphones.com
28
Batteries
Battery care and performance
After the battery is fully charged, you can expect the following performance:
Operation Operating time
While in use (talking) up to 5 hours
While not in use (standby*) up to 5 days
* Handset is off the base unit or charger but not in use.
• The battery needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every ve seconds.
— The screen displays BATTERY LOW and the low battery icon .
• Place the handset in the base so the CHARGE light turns on. The battery is typically fully
charged after at least 16 hours.
• You can keep the battery fully charged by returning the handset to the base after each use.
• If you repeatedly
get a low battery
indicator, even
after charging
overnight, the
battery should be
replaced.
• To reduce the
risk of re or
injury to persons
or damage to the
telephone, read
and follow these
instructions
carefully: Charge
the battery
provided with
or identied for
use with this
product only in
accordance with
the instructions
and limitations
specied in the
user’s manual.
Replace the handset battery
1. Remove the battery compartment cover on the handset by pressing on
the indentation and sliding the cover downward.
2. Lift out the old battery and disconnect the plug from the compartment.
3. Align the two holes in the new battery’s plug with the socket pins, and snap
the plug into place. Snap the battery in the compartment, as described
in Installation, on page 5.
4. Replace the cover by sliding it up into place until it clicks.
5. Place the handset in the base and allow it to charge for at least 16 hours
the rst time. The telephone might operate before that, but for best
performance, let the battery charge fully.
1
3
4
“CLICK”