Filter
Top Products
www.vtechphones.com
16
Speed dial
Presses
Dial key Once Twice 3 times 4 times 5 times 6 times
1
1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
*
*
#
& ‘ , - . #
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in
each location) in the speed dial memory locations you assign (numbered 1 through 9) in each handset.
These numbers can be dialed with the pressing of two buttons presses. You can also store telephone
numbers with names alphabetically in the directory. See Telephone Directory for instructions.
Store a speed dial entry
1. Press PROG on the handset. Then press or until the screen displays SPEED DIAL.
2. Press SEL/INT. The screen displays ENTER 1-9.
3. Press the key (1 through 9) to assign the speed dial location this number will be stored. The screen
displays ENTER NAME.
4. Using the chart below, enter up to 15 characters for the name you’re storing. Use to backspace
and make corrections; use to advance and add a space.
• The entries you
store in speed
dial memory are
marked from 01
to 09 and also
displayed in the
directory.
• Press and hold
PROG anytime
to exit speed dial
mode.
• When the
memory is full,
the screen
displays
MEMORY FULL,
an error tone
sounds and you
cannot store
a new number
until you delete
a record from
speed dial
memory or the
directory.