Filter
Top Products
www.vtechphones.com
10
Telephone operation
Handset operation
1. Answering a call
Press LINE 1 or LINE 2 to
answer a call.
2. Making a call
Press LINE 1 or LINE 2, then
dial the number.
-OR-
Dial the number (use to back-
space and make corrections),
then press LINE1 or LINE2 to
call.
To end your call, press the ap-
propriate LINE key, or place the
handset in its base.
3. Hold
Press to put a call on hold.
Press appropriate LINE key to
release hold.
-OR-
Use the extension to pick up the
call
4. Remove
When viewing the caller ID log,
press to delete the current re-
cord displayed. While handset is
in idle mode, press and hold to
delete all records in the call log.
5. /CID and /DIR
/CID
• While LINE 1 or LINE 2 is
on hold, press to select to
enter the conference mode or
make an intercom call.
• While on a call, press to de-
crease the volume. A double
beep will sound when you
reach the lowest setting.
• While phone is not in use,
press to display caller ID
information.
• While entering names or
numbers into memory, press
to delete last character
entered.
/DIR
• While on a call, press to in-
crease the volume. A double
beep will sound when you
reach the highest setting.
• While phone is not in use,
press to display directory
entries.
• While entering names or
numbers, press to add a
space.
• While L1 or L2 is on hold,
press to select to enter a
conference call or make an
intercom call.
6. Select
Press to display menu, or to
select highlighted item from
menu.
Intercom
With the base in idle, press to
page the base. Press again, or
place handset in the base to
cancel the page.
7. Flash/call waiting
During a call, press to receive
an incoming call, if call waiting
is activated.
8. Redial/pause
Press to view redial memory.
While entering numbers, press to insert a
dialing pause.
9. Program
With the handset idle (on-hook), press to
enter programming mode.
While the phone is in the intercom or
conference mode, press Program and
press SEL/INT to change the channel for
better reception.
1
3,4
7
8
9
2
5
6