Filter
Top Products
www.vtechphones.com
12
Telephone operation
Three way conference call
At the handset:
• While on an active call (on either line.)
• Press HOLD. Make a call on the other line.
• Press HOLD to hold the other call, the screen will display:
• Press SEL/INT to enter conference mode.
At the base:
• While on an active call (on either line.)
• Press HOLD. Make a call on the other line.
• Press HOLD to hold the other call, the screen will display:
• Press CONF. The two lines are conferenced together.
L1/2 HOLD CONF
12/28 2:34
AM
Four way conference call
At the handset:
• While on an active call (on either line.)
• Press HOLD. Make a call on the other line.
• Press HOLD to hold the other call, the screen will display:
• Press SEL/INT on handset to enter conference mode.
• Press CONF on base to enter conference mode.
At the base:
• While on an active call (on either line.)
• Press HOLD. Make a call on the other line.
• Press HOLD to hold the other call, the screen will display:
• Press CONF on base to enter conference mode.
• Press either LINE 1 or LINE 2 on handset to enter conference mode.
If you want to end the call with only one person, press the LINE button of the person you want to
connect (if will hang up with the other line).
L1/2 HOLD CONF
12/28 2:34
AM
L1 L2 HOLD
12/28 2:34
AM
L1 L2 HOLD
12/28 2:34
AM
• When the handset
is in conference
mode, press
SEL/INT on the
handset to page
the base unit,
when the base
rings, press FIND
HANDSET/INT
on the base to
answer the page,
press FIND
HANDSET/INT
again to exit the
conversation.
• When the base
is in conference
mode, press FIND
HANDSET/INT
on the base to
page the handset
unit, when the
handset rings,
press SEL/INT
on the handset to
answer the page,
press SEL/INT
again to exit the
conversation.