VTech 2338 Cordless Telephone User Manual


 
www.vtechphones.com
6
If the phone will
not be used for
a long period of
time, remove the
battery to prevent
possible leakage.
If you have any
trouble installing
your phone,
please refer to the
troubleshooting
section near the
end of this manual.
Use only the
VTech battery and
AC power adaptor
supplied with this
telephone.
if you need to
install your phone
within the same
room as other
cordless phones
or wireless
products, you may
need to select a
different channel
for your router
and or change the
channel on your
phone’s handsets.
Low battery warning
A low battery warning idicates one of the following:
1. There is no battery in your handset. The supplied battery must be installed in the handset.
2. The battery needs to be replaced, or
3. The battery is installed incorrectly. Re-install according to the instructions on page 5.
When in low battery mode, the LOW BATTERY icon will be on and an alarm will sound until the
handset is returned to the base unit for recharging. When the phone is on, the words LOW BATTERY
will replace the words PHONE ON. When the battery has been charged, these features will return
to normal.
Installation
Choose a location
For optimum performance of your cordless telephone
system:
1. Choose a central location for your base unit.
2. Install your phone(s) as far away as possible from
any other cordless (wireless) device such as cordless
telephones, 802.11 wireless router (for example, WiFi).
3. Install your phone(s) as far away as possible from
other electronic equipment such as microwave ovens,
televisions, computers, etc.
4. Install your telephone equipment away from heat sources
and direct sunlight.
5. Avoid excessive moisture, dust or extreme cold.