Filter
Top Products
www.vtechphones.com
5
Getting started
Installation
Installing handset battery
1. Plug the battery connector securely into the jack inside the battery compartment according to the
color-coded label.
2. Insert battery in the center of the battery compartment.
3 Press down on the wired side until the battery securely snaps into place.
4. Neatly tuck the wires inside the battery compartment.
5. Position the battery compartment cover and slide it towards the unit until it clicks into place.
6. Put the handset in the base unit to start charging the new battery for at least 16 hours.
7. After the battery is fully charged, press ON on the handset and you should hear a dial tone.
• Use only the
VTech battery
and AC power
adaptor
supplied with
this telephone.
• Recharging of
a fully depleted
battery may take
up to 16 hours.
A fully charged
battery could
provide up to
5 hours of talk
time, or up to 5
days of standby
time.
• Place the
handset in the
base unit when
not in use to
ensure optimum
performance.