Filter
Top Products
www.vtechphones.com
9
Basic operation
Handset features
( /DIR VOL+)
• When the phone is not in use, press
to display directory entries.
• Press & hold for 2 seconds during
idle mode to adjust ringer volume.
A double beep will sound when the
lowest setting is reached.
• During a call, press to increase
listening volume. A double beep will
sound when the highest setting is
reached.
TALK
• Press this button before dialing the number
to make a call.
-OR-
Dial the number (use to backspace and
correct digits), then press this button to
make a call.
• Press any key except OFF, CID/VOL-,
DIR/VOL+ to answer a call.
• While on a call, when there is a call waiting
alert, press this button to take the new call,
then press this button again to return to the
original call.
• When the phone is in use, this button will
glow steadily. When a call is on hold, it will
ash.
OFF
• During a call, press to hang up.
• While the handset is ringing, press
to silence the ringer.
• Press and hold for two seconds
while in idle mode to erase the
MISSED CALLS display.
• During programming, press to exit
without making changes.
(CID/VOL-)
• When the phone is not in use, press to
display caller ID information.
• Press and hold for two seconds while in idle
mode to adjust ringer volume. A double beep
will sound at the lowest setting.
• During a call, press to lower listening vol-
ume. A double beep will sound at the lowest
setting.
SELECT
• Press to store a programming op-
tion, or to store a directory entry.
PROG
• Press to enter programming mode while
the handset is idle (off).
REDIAL/PAUSE
• Press TALK, then press this button
to call the last number dialed.
-OR-
Press this button, then press TALK
to call the last number dialed.
• While handset is not in use, press
this button twice to delete the last
number dialed from this telephone.
• While dialing or entering numbers
into the directory, press to insert a
four-second dialing pause.
CHAN/REMOVE
• Switch to a clear channel while on a call.
• While handset is not in use, press and hold
to delete all records in the call log.
When viewing the call log, press to delete
the current record.