Filter
Top Products
www.vtechphones.com
15
Basic operation
Speed dial
You can store as many as nine frequently dialed telephone numbers with names (up to 15 characters
and 24 digits in each location) into the speed dial memory locations you assign in the handset.
Store a speed dial entry
1. Press PROG.
2. Press or until the screen displays SPEED DIAL.
3. Press SEL. The screen displays ENTER 1-9.
4. Press the key (1 through 9) for the memory location for the new entry.
The screen displays ENTER NAME.
5. Using the chart below, enter up to 15 characters for the name to be stored with the
number. Use to backspace and make corrections; use to advance or add a space.
6. When finished entering the name, press SEL or PROG. The screen displays ENTER
NUMBER.
• The entries stored in
speed dial memory
will be marked 1
through 9 in the
telephone directory.
• Press OFF anytime
to exit the speed dial
mode.
• When the memory
is full, the screen
displays MEMORY
FULL, an error
tone sounds and no
new entry can be
stored until an entry
is deleted from the
speed dial memory
or the telephone
directory.
• Take caution when
assigning speed dial
location numbers
in memory. If the
location already
has an entry stored,
the new entry
will overwrite the
existing one. Be
careful not to save
over entries you do
not wish to delete
from memory.
Presses
Dial Key Once Twice 3 Times 4 Times 5 Times 6 Times
1
1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
*
*
#
& ‘ , - . #