Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 50 ] www.uniden.com
* For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop
the recording, enter the command again.
5) After all of the Help Guidance prompts have played, you hear intermittent beeps
indicating that the system is in the command waiting mode. You may enter
another command at this time from the chart.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on remotely
from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear a beep.
3) Press 0 and then enter your PIN code. The answering system announces the
number of messages stored in memory. You hear "To play incoming messages,
press zero two. For help, press one zero".
4) Press 0 then 6 to turn the answering system On. You hear the outgoing message
and a confirmation tone.
5) Hang up the phone and subsequent calls will be answered by the system.
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:35 PM Page 50