Filter
Top Products
MEMORY DIALING[ 20 ] www.uniden.com
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless phone stores up to 20 names/numbers in the handset.
1) Press the mem key, “
Select Memory” is displayed.
2) Press the vol/ring/ or vol/ring/ key, or enter a number
(01 - 20) to select the memory location where you would
like to store the number.
3) Press the mem or select key.
4) Press the mem or select key. The following screen appears and
a cursor flashes indicating that the display is ready for the
name to be entered.
If this screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
“
Go Back” to choose another location.
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for entering names and special characters". (See page 22).
• Use the #/ and
*
/tone/ keys to move the cursor to the desired location.
• Use the delete/ch key to delete characters as needed.
• Press and hold the delete/ch key to delete all the characters.
• If a name is not required, go to step 6.
Select Memory
01
02 JOHN DOE
01:(Empty)
Press select
to edit
Store Name
Edit Memory01
Delete Memory01
Go Back
• In memory dialing
operation, you must
press a key within 30
seconds. Otherwise, an
error tone will sound
and the phone will
return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
• You have 30 seconds
after pressing mem to
enter the number you
wish to store.
Otherwise, an error
tone will sound.
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 20