Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 44 ] www.uniden.com
▼Choosing between the two outgoing messages
Press the greeting key. Then press the greeting key again when the outgoing
message is played. This switches between the prerecorded greeting and the personal
greeting. After finishing playing back the message, a confirmation tone is heard.
Setting the base ringer volume
You have three ringer options. One allows you to turn the ringer off. The other two
are volume levels.
Temporarily Mute the Base Ringer
Press the play/stop key to temporarily mute the incoming ring. The ringer will sound
with the next incoming call.
Adjusting the speaker volume level
You can adjust the volume of the base speaker by pressing the select/volume or
key on the base. Press for louder or for softer while the base speaker is
being used except for menu mode. The numbers - are displayed on the base
indicating the volume levels. being the softest and being the loudest.
1) Press the ringer key.
You hear the ringer at the current volume level
([ ] High, [ ] Low, [ ] off) (if you set the
base ringer volume to off, “Ringer off” is
announced) and it is displayed on the base.
2) Press the ringer key until the desired ringer option
appears.
3) The system displays the new ringer volume.
To delete the personal Greeting, press the delete key during the announcement and the system
announces “Greeting has been deleted”.
find hs
answer on/off delete
charge/in use
Digital
Answerer
clock/menu
mic
set
select/volume
memo rec greeting ringer
When you have set the
base ringer to off and
the handset is on the
base, you will still hear
the ringer from the
handset.
When you press at 9
or at 0, an error tone
sounds.
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 44