Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [ 39]www.uniden.com
THE INTEGRATED
ANSWERING DEVICE
7) Press the set key to select the minute.
8) Press the select/volume or key until you hear the correct AM or PM setting.
The message counter displays [ ] or [ ].
9) Press the set key to select the AM/PM setting.
You hear a confirmation tone, then the announcement “Time” and the time and day
are announced for your review. After a few seconds, the system announces “To set
security code, press menu again”.
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit Personal
Identification Number (PIN) code (01-99). To select a PIN, perform the
following steps:
1) Press the clock/menu key twice in standby mode.
“Security code” and the current PIN code is announced as it is displayed on the
base. Then the system announces the guidance for setting the PIN code.
2) Press the select/volume or key until the desired number appears.
3) Press the set key to select the PIN code. You hear a confirmation tone, then the
announcement “Security code” and the new PIN code is announced. After a few
seconds, the system announces “To set ring time, press menu again”.
The PIN code is set to
"80" when you purchase
the cordless phone.
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 39