Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 42 ] www.uniden.com
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
1) Press the clock/menu key five times in standby mode.
You hear “Message alert” and the current setting ([ ] Off
or [ ] On), and it is displayed on the base. Then you hear the guidance for
setting the Message Alert.
2) Press the select/volume or key to make your selection.
3) Press the set key to select the new setting. You hear a confirmation tone, then
the announcement “Message alert” and the current setting you have selected is
announced. After a few seconds, the system announces “To set language, press
menu again”. When the first new message is received, the alert tone will begin to
sound.
Turning the Message Alert tone Off by pressing any key.
1) To quickly turn Message Alert tone off, press any key on the base unit and the
tone will automatically deactivate. To reset, go back into the menu setup mode
(steps 1 - 3 above.)
Turning Message Alert tone Off when you’re away from your phone.
1) When all new messages are played back using the remote playback feature (see
page 49) the Message Alert tone will automatically deactivate. The tone will not
deactivate until all messages are played back.
EXAI3248_UP004BH UP01004BA_0.Qx 3/14/3 1:34 PM Page 42