Filter
Top Products
ADDITIONAL INFORMATION
[ 35 ]
ADDITIONAL
INFORMATION
SSyymmppttoomm
Severe noise interference.
The answering system does not
work.
The answering system does not
answer calls.
Messages are incomplete.
After a power failure, the
outgoing message is deleted.
No sound on the base unit
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another
touch-tone phone.
If you still have a problem.
SSuuggggeessttiioonn
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move to another location or turn off the source of interference.
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your personal outgoing message again. The default message should remain.
• Adjust the speaker volume on the base unit.
• Make sure you’re using the correct PIN code.
• Make sure that the touch-tone phone you’re using can transmit the tone for at least two
seconds. If it cannot, you may have to use another phone to access your messages.
• Call our customer hotline at 1-800-297-1023.
EXAI2980A ReSIZE-ENG 7/31 7/31/01 16:50 Page 35