Filter
Top Products
MEMORY DIALING
[ 17 ]
MEMORY DIALING
Chain Dialing
The 10 memory locations on the handset are not limited to phone numbers. You may want to store in memory a
group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain
Dialing.
An example of this is a bank account number. Once you have called your bank, when you are prompted to enter the
account number, simply press
mm
and then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a phone number. (Refer to "Storing
Phone Numbers and Names" on page 14.) Enter a pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time between digits as they are sent.
Editing a Stored Name and/or Phone Number
1)Press and hold
mm
until “Memory Store“ is displayed.
2)Press
▲ and ▼ or enter a number (0 - 9) to select the memory location you would
like to edit.
3)Press
sseelleecctt
.
The following screen appears with the memory location number that you have selected
in the display.
4)Press
▲ or ▼ to select “Edit Memory“, then press
sseelleecctt
.
The following screen appears.
The cursor flashes indicating that the display is ready for the name to be edited.
When a name has not been stored, the cursor appears at the beginning of the
second line.
5)Use the number keys,
*
/tone , # , or
ddeelleettee
to edit the name. (See page 14.)
To edit only the phone number, skip this step.
6)Press
sseelleecctt
. The following screen appears.
The cursor flashes indicating that the display is ready for the number to be edited.
7)Use the number keys,
rreeddiiaall//pp
or
ddeelleettee
to edit the phone number.
The phone number cannot exceed 20 digits. (See page 14.)
If you don´t want to change the phone number, skip this step.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
Edit Memory 1
Delete Memory 1
Go Back
Store Name
UNIDEN CORP
Store Number
8002971023
EXAI2980A ReSIZE-ENG 7/31 7/31/01 16:50 Page 17