Filter
Top Products
BASICS
[ 12 ]
Adjusting the Handset Ringer and Earpiece Volume
RRiinnggeerr ttoonnee aanndd vvoolluummee
When the phone is in standby mode, pressing the
vvooll
▲ or ▼ key on the handset selects the handset ringer volume
and tone. There are two ringer tones each with two volume levels. Continue pressing the volume keys to listen to all
tones and volume levels. The phone keeps the last ringer tone and volume setting selected.
EEaarrppiieeccee vvoolluummee
The handset earpiece volume settings (Low, Medium, High and Maximum) can only be adjusted during a call. (Talk
Mode) Press
vvooll
▲ or ▼ repeatedly to select Low, Medium, High, or Maximum. When you hang
up, the phone keeps the last volume setting selected.
As you increase or decrease the volume, your selection appears on the display.
Talk 0:15
Volume High
Redial
The
rreeddiiaall//pp
key redials the last number dialed. The redialed number can be up to 32 digits long.
Tone Dialing Switch-over
Some telephone companies use equipment that require pulse dialing (sometimes referred to
as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dial-
ing during the call. An example of this could be entering your bank account number after
you have called your bank. The digits of your bank account can be entered using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call connects, press
*
/tone .
Enter the desired number (like in the example above, the bank account number). These digits will be sent as tone
dialing. This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 17).
Once the call ends, the tone mode is canceled and pulse dialing resumes.
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.
•
SSttaannddbbyy MMooddee
- The handset is not in use, off the base and
ttaallkk
has not been pressed. A dial tone is not present.
•
TTaallkk MMooddee
- The handset is off the base and
ttaallkk
has been pressed enabling a dial tone.
The tone feature
only applies when
the dial mode is set
to pulse.
EXAI2980A ReSIZE-ENG 7/31 7/31/01 16:50 Page 12