Filter
Top Products
[57] ADDITIONAL INFORMATION
www.uniden.com
The handset doesn’t
communicate with the main base
or the other handset.
• Re-register both handsets (see page 12).
No 3-way conversation. • Only one handset at a time can talk with an outside caller. To allow the other handset to talk to
the caller, transfer the call.
The answering system does not
work.
• Make sure the AC adapter is plugged into wall outlet.
• Make sure the answering system is turned on.
The answering system does not
record any messages.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
After a power failure, the
outgoing message is deleted.
• Record your personal outgoing message again. The default message should remain.
No sound on the main base
speaker during call monitoring
or message playback.
• Adjust the speaker volume on the main base.
Cannot access remote call-in
features from another touch-
tone phone.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at least two
seconds. If it cannot, you may have to use another phone to access your messages.
If you still have a problem. • Call our customer hotline at 1-800-297-1023.
Symptom Suggestion
ADDITIONAL
INFORMATION
UP038.book 57 ページ ２００４年１月２６日 月曜日 午前１０時１７分