Filter
Top Products
GETTING STARTED [12]
www.uniden.com
Register Handsets to the Main Base before Using!
Whichever handset you choose to charge in the main base will automatically register to the
main base.
The second handset (charging in the extra charging cradle) MUST also be registered to the
main base before use. Follow the steps below to register the second handset.
1) Be sure both handsets are fully charged.
2) Remove the handset from the charging cradle, and place it in the main base. The charge
in use LED light on the main base will begin to flash, indicating that the registration is
taking place.
3) Wait for at least five seconds, then remove the handset from the main base.
4) Press the find hs key on the main base. If both handsets beep, registration is complete. If
one handset does not beep, re-register that handset.
5) Once both handsets are registered, it doesn’t matter which handset is placed in the main
base or the charger.
•When you charge the
handsets, Caller ID
summary screen and
the name of the
handset,
HS1
appears.
If
HS2
appears, you
are charging the
handset No. 2.
•The charging cradle
can be used to charge
either handset.
note
GETTING STARTED
UP038.book 12 ページ ２００４年１月２６日 月曜日 午前１０時１７分