Filter
Top Products
[35] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to the
main base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/
clock key.
The system announces “Time,” the current time and the
instructions for setting the time.
2) Press the or /volume/select key until the correct
day is announced. The numbers [ ] through [ ] are
displayed on the main base.
3) Press the set key to select the day.
4) Press the or /volume/select key until you hear
the correct hour setting. The numbers [ ] through
[ ] are displayed on the main base.
5) Press the set key to select the hour.
6) Press the or /volume/select key until you hear
the correct minute setting.
The numbers [ ] through [ ] are displayed on the
main base.
•Normally, the system
will return to standby
if it remains idle for 10
seconds after the or
/volume/select
key is pressed. For
setting the time,
however, the idle time
is extended to two
minutes.
•Press and hold the
or /volume/select
key to quickly scroll
through the numbers
on the display.
note
THE INTEGRATED
ANSWERING DEVICE
UP038.book 35 ページ ２００４年１月２６日 月曜日 午前１０時１７分