Filter
Top Products
[15] GETTING STARTED
www.uniden.com
You must subscribe to Caller ID service through your local telephone provider to use this
feature.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the /vol/ key to select
CIDCW
.
3) Press the select/channel key to toggle and turn on Caller ID on
Call Waiting.
4) Press the end key and return the handset to the main base to
complete the setting. The handset returns to standby mode.
Entering Your Area Code
If you enter a 3-digit area code number in the
Area Code
option, your local area code does
not appear in Caller ID messages. Do not program this option if your calling area requires 10-
digit dialing. When reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you will see a full 10-digit
number.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following setting screen appears.
2) Press the /vol/ key twice to select
Area Code
.
3) Press the select/channel key. If an area code was already stored,
the phone will display it.
GETTING STARTED
UP038.book 15 ページ ２００４年１月２６日 月曜日 午前１０時１７分