THE INTEGRATED ANSWERING DEVICE [34]
www.uniden.com
Setting Up Your Answering System
Answering System Settings
To set the following six functions you must enter the menu mode.
"Time"
"Security Code"
"Ring Time"
"Record Time"
"Language"
menu/clock
menu/clock
menu/clock
menu/clock
"Message Alert"
menu/clock
menu/clock
menu/clock
Return to standby
with tone sounds.
• To scroll through the menu options, repeatedly press
the menu/clock key in standby mode. The system
returns to standby after the last menu option. You
hear a confirmation tone to indicate standby mode.
• If any of the following occurs during menu setup, the
system returns to standby; you will have to start over
with the procedure you were performing.
-The talk/flash key is pressed
-The (play/stop) key is pressed
-10 seconds elapse without a key press
-An incoming call is received
• If the system remains idle for about five seconds after
the announcement, the system returns to standby.
Once the or /volume/select key is pressed, the
idle time is extended to 10 seconds.
•For your convenience,
voice prompts will
guide you through the
menu mode.
•After the setting, press
the (play/stop)
key to exit the menu
mode, or the menu/
clock key to move to
the next menu option.
note
THE INTEGRATED
ANSWERING DEVICE
UP038.book 34 ページ 2004年1月26日 月曜日 午前10時17分