Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [42]
www.uniden.com
Setting the main base Ringer Volume
You will hear three ringer options. One allows you to turn the ringer off. The other two are volume
levels. You can change the ringer volume while in standby mode or the incoming call is ringing.
1) Press the ringer key.
You hear the ringer at the current volume level ([ ]
high, [ ] low, [ ] off) (if you set the main base
ringer volume to off,
"Ringer off " is announced) and it
is displayed on the main base.
2) Press the ringer key repeatedly until the desired ringer
option appears.
3) The system displays the new ringer volume.
Temporarily Mute the main base Ringer and Call Screen
Press the (play/stop) key to temporarily mute the incoming ring and call screen. The
ringer will sound with the next incoming call. To turn the ringer back on for this call, press
the ringer key. To hear the answering machine and screen this call, press the
or /volume/select key.
Adjusting the Speaker Volume Level
You can adjust the volume of the main base speaker by pressing the or /volume/select
key on the main base. Press the /volume/select key for louder or the /volume/select
key for softer while the main base speaker is being used except for menu mode. The numbers
[ ] -[ ] are displayed on the main base indicating the volume levels. [ ] being the
softest and [ ] being the loudest.
Although you have set
the main base ringer to
off, you will still hear
the ringer from the
handset on the main
base if its ringer is on.
note
THE INTEGRATED
ANSWERING DEVICE
UP038.book 42 ページ ２００４年１月２６日 月曜日 午前１０時１７分