Filter
Top Products
[9] GETTING STARTED
www.uniden.com
D. Mount the Main Base on a Wall
Standard wall plate mounting
This phone can be mounted on any
standard wall plate.
1) Locate the wall mount adapter on
the main base as shown and slide the
wall mount adapter into the notches
on the main base bottom with the
tab pressed.
2) Plug the AC adapter to the DC IN 9V
jack.
3) Route the AC adapter cord through
the molded wiring channel as shown.
4) Plug the AC adapter into a standard
120V AC wall outlet.
5) Plug the telephone line cord into the
TEL LINE jack. Route the cord
through the molded wiring channel
as shown.
6) Plug the telephone line cord into the
telephone outlet.
7) Align the mounting slots on the
main base with the mounting posts
on the wall. Then push in and down
until the phone is firmly seated.
2
1
5
3
4
6
7
7
To remove, push up
a tab on the wall
mount adapter as
shown.
GETTING STARTED
UP038.book 9 ページ ２００４年１月２６日 月曜日 午前１０時１７分