Filter
Top Products
[51] ADDITIONAL INFORMATION
www.uniden.com
ADDITIONAL
INFORMATION
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by
other equipment, the cordless phone provides AutoSecure
TM
(which electrically locks your phone
when each handset is in the cradle) and Random Code
TM
digital security which automatically
selects one of over 262,000 digital security codes for each handset and the main base.
If the handset battery pack is completely discharged or the battery pack is removed, the digital
security code will be lost. If this happens, a new security code is set automatically the next time
the battery pack is charged. In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1) Remove the handset from the cradle. Press and hold the find hs key on the main base.
2) While holding the find hs key, place the handset in the main base, and leave the handset
in the main base for more than three seconds.
3) Remove the handset from the main base. Then place the second handset in the main base
and wait for more than three seconds. No need to holding the find hs key this time.
4) Press the talk/flash key on one handset. Once you make sure
Talk
appears on the display,
press the end key. Then, try with the second handset. If each handset displays
Talk, a
new security code is set. Otherwise, return to step 1 and try again.
UP038.book 51 ページ ２００４年１月２６日 月曜日 午前１０時１７分