Filter
Top Products
ADDITIONAL INFORMATION[ 58 ] www.uniden.com
Symptom
The Caller ID does not display.
The answering system does not
work.
The answering system does not
record any messages.
Messages are incomplete.
After a power failure, the
outgoing message is deleted.
No sound on the base unit
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another touch-
tone phone.
If you still have a problem.
Suggestion
•The handset was picked up before the second ring. The Caller ID is displayed
between the first and second ring.
•The call was placed through a switchboard.
•
Call your local telephone company to verify your Caller ID service is current.
• Charge the handset.
• Make sure the the AC adapter is plugged into the base and wall outlet.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your personal outgoing message again. The default message should remain.
• Adjust the speaker volume on the base unit.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at least
two seconds. If it cannot, you may have to use another phone to access your mes-
sages.
• Call our customer hotline at 1-800-297-1023.
EXAI5180 9/17/03 10:21 AM Page 58