Filter
Top Products
GETTING STARTED[ 16 ] www.uniden.com
Make sure your battery
pack is fully charged
before choosing the
dialing mode.
1) When the phone is in standby mode, press and hold
call id/menu. The Caller ID setting screen appears.
2) Press vol/ / twice to select
Area Code.
3) Press select.
4) Use the number keys (0 - 9), or delete/channel to enter the
3-digit area code.
5) Press select. A confirmation tone sounds and the displayed area code is entered.
6) Press end or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use
delete/channel and the number keys to enter the new area
code. Then press select. A confirmation tone sounds.
To complete the setting, press end or return the handset to the
base unit.
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However, some phone systems (such as those in rural areas) still use pulse
dialing. The default setting is tone dialing. Depending on your dialing system, set
the mode as follows:
EXAI5180 9/17/03 10:20 AM Page 16