Filter
Top Products
GETTING STARTED
GETTING STARTED [ 17]www.uniden.com
1) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
2) Press vol/ / three times to select
Dial.
3) Press select to toggle between
Tone and Pulse for
each setting.
4) Press end or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
• If you are not sure of your dialing system, set for tone dialing and make a trial call.
If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "Switch Over" to tone dialing. (Refer to
"Tone Dialing Switch Over" on page 20.)
Setting the language
1) When the phone is in standby mode, Press and hold
call id/menu. The following screen appears.
2) Press vol/ / four times to select
Language.
3) Press select to toggle
Eng (English), Fr. (French) or Esp
(Spanish) for each setting.
4) Press end or return the handset to the base unit to complete the setting. The
handset returns to standby mode.
There are three
languages to choose
from; English, French
and Spanish.
EXAI5180 9/17/03 10:20 AM Page 17