Filter
Top Products
MEMORY DIALING[ 22 ] www.uniden.com
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 10 names/numbers in the handset.
1) Press memory in standby mode,
Select Memory is displayed.
2) Press vol/ / or vol/ / , or enter a number
(1 - 0) to select the memory location where you would
like to store the number.
3) Press memory or select.
4) Press memory or select. The
Store Name screen appears and
a cursor flashes indicating that the display is ready for the
name to be entered.
If the Edit screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
Go Back to choose another location.
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters" (see page 24).
• Use #/ and /tone/ to move the cursor to the desired location.
• Use delete/channel to delete characters as needed.
• Press and hold delete/channel to delete all the characters.
• If a name is not required, go to step 6.
Select Memory
01
02 JOHN DOE
Store Name
Edit Memory01
Delete Memory01
Go Back
•In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return
the handset to the
base, the phone will
return to standby
mode also.
•You have 30 seconds
after pressing
memory or select to
enter the number you
wish to store.
Otherwise, an error
tone will sound and
the phone will returns
to standby mode.
01:(Empty)
Press Select
to edit
EXAI5180 9/17/03 10:20 AM Page 22