Filter
Top Products
GETTING STARTED
GETTING STARTED [ 13]www.uniden.com
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches on
the bottom of the base.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded
wiring channel as shown.
4) Plug the AC adapter into a standard 120V AC
wall outlet.
5) Plug the telephone line cord into the TEL LINE
jack. Wrap the cord inside the molded wiring
channel as shown.
6) Plug the telephone line cord into the telephone
outlet.
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
Wall plate
AC outlet
5
2
7
6
7
4
3
AC
adapter
DO NOT use an AC
outlet controlled by
a wall switch.
EXAI5180 9/17/03 10:19 AM Page 13