Filter
Top Products
▼ Standard wall plate mounting
This phone can be mounted on any standard AT&T or GTE wall plate.
1. Snap the desktop/wall mount
adapter into the bottom of the base
as shown.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside
the molded wiring channel.
Wrap the cord around the strain
relief notch.
4. Plug the AC adapter into a standard
120V AC wall outlet.
5. Plug one end of the short telephone
cord into the
TEL LINE
jack
on the back of the base. Plug the
other end into a standard
telephone jack.
WALL INSTALLATION
6
Use only the Uniden AC
adapter supplied with
this phone. DO NOT
use an outlet controlled
by a wall switch.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 6