Filter
Top Products
34
1. To turn the answering system on, press
answer on/off
. A tone sounds. An
outgoing message plays on the base
speaker. A second tone sounds after the
message plays. The message counter LED
turns on to indicate the unit is ready to
answer calls.
2. To turn the answering system off, press
answer on/off
again. A tone sounds
followed by the announcement “Answer
off”. The message counter LED turns off.
The clock on the EXS9800 Answering System starts when power
is applied to the base.
To set the correct time:
1. Press and hold
clock
until a tone sounds.
2. Press
skip
or
repeat
until the correct
day is announced. Numbers zero through
six display as each day is announced.
3. Press
clock
again to select the day.
The hour setting is announced.
4. Press
skip
or
repeat
until you hear the
current hour setting. Numbers 1 through 12
display as each hour is announced.
SETTING THE CLOCK
TURNING THE ANSWERING SYSTEM ON/OFF
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 34