Filter
Top Products
1. Insert two mounting screws (with their
appropriate anchoring device) into the wall 3-
15/16 inches apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting
the phone.
2. Snap the desktop/wall mount
adapter into the bottom of the base
as shown.
3. Plug the AC adapter cord into the
10V DC input jack on the back of
the base.
4. Put the AC adapter cord inside the
molded wiring channel. Wrap it
around the strain relief notch. Plug
the AC adapter into a standard 120V
AC wall outlet.
5. Plug one end of the long telephone
cord into the
TEL LINE
jack
on the back of the base. Plug the
other end into a telephone jack.
8
Be careful not to insert
the mounting screws
into possible electrical
hazards such as cables,
wiring, or pipes.
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 8