Filter
Top Products
38
The ring time/toll saver switch sets your
answering system to answer after two or
four rings.
In the
TS
(Toll Saver) position, if you have
new messages, the answering system
answers after two rings. If there are no new messages, the system
answers after four rings. This way, when you call long distance to
check
your messages, and have no messages, you can hang up after the
second ring to save a charge.
The
RESET
button is used to initialize the
base computer.
The reset button can be used if an AC power
line disturbance causes the answering
system to malfunction and become
inoperative. Pressing
RESET
does not erase
any data stored in your system memory.
The base LED displays the total number of messages. If the display is
blinking, you have new messages. When the message center is full,
the LED displays FL. The EXS9800 plays your new messages first.
After listening to your new messages, you may listen to your
old messages.
1. Press
play/stop.
The system announces the number of
new and old messages. After the each
message is played, the time and day the
message was received is announced. The
message counter LED displays the
number of current messages.
PLAYING YOUR MESSAGES
USING THE RESET BUTTON
SETTING THE TOLL SAVER SWITCH
USING
THE INTEGRATED ANSWERING DEVICE
To stop playing your
message at any time,
press
play/stop
again.
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 38