Filter
Top Products
43
If your phone is not performing to your expectations, please try these
simple steps before calling Uniden customer service at (800) 297-1023.
QUICK REFERENCE CHART
TROUBLESHOOTING
YOUR NEW PHONE
The charge light
won’t come on
when the
handset is
placed in
the base.
●’ Make sure the AC adapter is plugged into the base
and wall outlet.
● Make sure the handset is properly seated
in base.
● Make sure the charging contacts on the handset
and base are clean.
PROBLEM
The audio
sounds weak
and/or scratchy
● Make sure that the base antenna is in a vertical
position.
●’ Move the handset and/or base to a different
location away from metal objects or appliances and
try again.
Can’t make or
receive calls.
The handset
doesn’t ring or
receive a page.
● Check both ends of the base telephone
line cord.
● Make sure the AC adapter is plugged into the base
and wall outlet.
● Disconnect the AC adapter for a few minutes, then
reconnect it.
● Place the handset back on the charging cradle for a
few seconds. The
status
LED blinks indicating
that the phone has been reset.
● The Nickel-Cadmium battery pack may be weak.
Charge the battery on the base for 15-20 hours.
● Be sure the antenna is in a vertical position.
● The handset may be too far away from the
base.Place the base away from appliances or metal
objects.
● Place the handset back on the charging cradle for a
few seconds.
● The
status
LED blinks indicating that the phone
has been reset.
SUGGESTION
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 43