Filter
Top Products
You may call your answering system from any touch tone phone to
monitor sounds in the room where the base is installed.
1. Call your telephone number.
2. During the outgoing message playback, press
#
followed by your PIN
code. (See SELECTING A PIN CODE, page 37.)
3. Press
#
then
*
while the system announces the time and date.
You will hear sounds in the room where your base unit is installed.
After 15 seconds, the answering system returns to the Command
Waiting mode.
4. Press
#
then
*
to monitor the room for another 15 seconds. Or, select
another remote function. Hang up to exit the system. The answering
system automatically returns to Standby.
REMOTE ROOM MONITOR
42
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 42