Filter
Top Products
41
You can access your answering system from a remote location with a
touch-tone telephone to check recorded messages, play or delete
messages, or record a new outgoing message.
1. Call your telephone number.
2. While the outgoing message is playing, press
#
followed by your PIN
number. (For instructions to set your PIN code see page 37).
3. The answering system announces the time and day followed by the
number of messages in memory. Message playback automatically
begins.
4. You may listen to your messages, or you may select a command from
the following chart:
5. After all of your messages have played, intermittent beeps indicate that
your system is in Command Waiting mode. At this time, you may enter
another command from the chart above.
6. When you are finished, hang up to exit the system. The answering
system automatically returns to Standby.
FUNCTION PRESS
Repeat #, 1
Play #, 2
Skip #, 3
Delete #, 4
Stop #, 5
Answer On #, 6
Voice Memo Record/Stop #, 7
Greeting Record/Stop #, 8
Answer Off #, 9
Monitor #,
*
REMOTE ACCESS AWAY FROM HOME
You must enter a
command within 15
seconds of entering
Command Waiting mode
or the answering system
automatically hangs up
and returns to Standby.
The system will only
playback messages for
four minutes and then it
returns to Command
Waiting mode. To
continue playing your
messages, press
# 2
again within 15 seconds
exs9800 User's Manual.qxd 3/3/99 4:30 PM Page 41