Filter
Top Products
MEMORY FEATURES[ 22 ]
Making Calls with Memory Dialing
01
02 JOHN SMITH
03 UNIDEN
01
02 JOHN SMITH
03 UNIDEN
Follow the steps below to dial a number using a programmed memory location:
WWiitthh tthhee hhaannddsseett
1) Press m. The handset displays your programmed memory locations.
2) Press
▲
up/int’com and dn
▼
/conf to select the memory location
you would like to dial. The following screen appears:
3) Press line 1. The number dials.
WWiitthh tthhee bbaassee
1) Press line 1. The line 1 LED lights.
2) Press memory. Enter the memory location number
((00--99))
, to dial the number.
Chain Dialing
The 30 memory locations on the handset are not limited to phone numbers. You may want to store in memory a group
of number (up to 16 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, when you are prompted to enter
the account number, simply press m and then the location where the special number has been stored.
Store your special number in memory as you would a phone number.
(Refer to "Storing a Phone Number in Memory", on page 21)
Enter a "pause" in the sequence as necessary. A "pause" counts as one digit and represents a two second delay
in time between digits as they are sent.
• To exit the
memory function
without dialing
press m. The
handset returns
to standby.
• Whenever you are
using a menu
screen, you must
press a key within
20 seconds or the
phone will return
to standby.
note
EXI2926 ENG Resize 9/4/01 2:03 PM Page 22