Filter
Top Products
GETTING STARTED[ 12 ]
If you enter a 3-digit area code number in the "Area Code" option, your local area code does not appear in
the Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When
reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside
your local area code, you will see a full 10-digit number.
Entering Your Area Code
When the area code has already been stored in memory, the stored area code will be displayed.
To change it, use the delete/flash and number keypad to enter the new area code. Then press
sel/vol. To complete the setting, press call id/hold or return the handset to the base unit.
817
note
Caller ID Setup
1 Line 1
2 Line 2
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
1) When the phone is in the standby mode, press and hold call id/hold
until the Caller ID setting screen appears.
2) Press
▲
up/int’com or dn
▼
/conf to select "Line 1" or "Line 2".
3) Press sel/vol.
4) Press
▲
up/int’com or dn
▼
/conf to select "Area Code".
5) Press sel/vol.
6) Use the dial buttons (0 to 9 ) to enter the 3-digit area code.
7) Press sel/vol. A tone sounds and the displayed area code is entered.
8) Press call id/hold to complete the setting. Or return the handset to the base
unit. The handset returns to standby mode.
note
If your calling area
requires 10-digit
dialing, do not
program this option.
EXI2926 ENG Resize 9/4/01 2:03 PM Page 12